High pressure hose EN 853 1SN

High pressure hose EN 853 1SN
- High pressure hoses according to EN 853 1SN
- Size 6...25 mm
- Working pressure up to 225 bar
- Burst pressure up to 900 bar
- Fluid temperature range -40°C to +100°C
- Operating life, not less 250 000 cycles
- Different of fittings and connectors

One steel wire braided hoses according to EN 853 1SN standard. High pressure hoses are used for most hydraulic systems of mobile machines and equipment with medium pressure.

Applications:
- Agricultural machinery
- Utility machines

One steel wire braided hoses according to EN 853 1SN standard.  High pressure hoses are used under normal climatic conditions for most hydraulic systems of mobile machines and equipment with medium pressure.

Characteristics:
- High quality hoses from well-know manufacturers: Gates, Semperit, Alfagomma, etc.
- Type hose - NBR nitrile.
- Cover - synthetic rubber.
- One steel wire braided.
- The bend radius of 100 mm, not less.
- Used with fitting DKM, DKL, DKOL, DKS, DKOS, DKR, DKRO, ORFS, JIC 37°.
- Female CM, CORFS, CJIC 37 °, CEL, CES, Banjo.
- Length from 0,2 to 50 meters.
One steel wire braided hoses according to EN 853 1SN standard.  High pressure hoses are used under normal climatic conditions for most hydraulic systems of mobile machines and equipment with medium pressure.

Characteristics:
- High quality hoses from well-know manufacturers: Gates, Semperit, Alfagomma, etc.
- Type hose - NBR nitrile.
- Cover - synthetic rubber.
- One steel wire braided.
- The bend radius of 100 mm, not less.
- Used with fitting DKM, DKL, DKOL, DKS, DKOS, DKR, DKRO, ORFS, JIC 37°.
- Female CM, CORFS, CJIC 37 °, CEL, CES, Banjo.
- Length from 0,2 to 50 meters.