gear pumps of design Version «N»

Products / 齿轮泵 / gear pumps of design Version «N»

Series 'N' gear pumps group 2, displacement 4 up to 22 ccm and group 2.5 displacement 16 up to 45 ccm.
The pump housing is made of extruded aluminum with the usage of PTFE bearings. The pumps are intended for hydraulic system with nominal pressure 200 bar. Gear Pump GP25-4 is developed with port dimensions, which refer to the gear pump PZ2-25KS produced by Hydrotor plant, Tykhola, Poland

Group by displacement / Gruppe nach Foerdervolumen		2 (4...20 ccm)
Displacement Code / Kode vomFoerdervolumen		4	6	8	10	11	12	14	15	16	19	20
Displacement,  q Foerdervolumen,  q	cm3 ccm	4	6	8	10	11	12	14	15	16	19	20
Maximum Continuous Pressure,  P1 Dauerdruck ,  P1	MPa (bar) MPa (bar)	20 (200)										16 (160)
Maximum Intermittent Pressure,  P2 Kurzzeitiger Druck,  P2	MPa (bar) MPa (bar)	25 (250)										21 (210)
Maximum Peak Pressure,  P3 Spitzendruck,  P3	MPa (bar) MPa (bar)	28 (280)										25 (250)
Maximum Speed,  nmax Drehzahl,  nmax	min-1 min-1	4000		3600						3000
Minimum Speed,  nmin Drehzahl,  nmin	min-1 min-1	500

Group by displacement / Gruppe nach Foerdervolumen		2.5 (16...45 cм3)
Displacement Code / Kode vomFoerdervolumen		16	19	20	23	25	28	30	32	37	40	45
Displacement,  q Foerdervolumen,  q	cm3 ccm	16	19	20	23	25	28	30	32	37	40	45
Maximum Continuous Pressure,  P1 Dauerdruck ,  P1	MPa (bar) MPa (bar)	17 (160)	20 (200)								16 (160)
Maximum Intermittent Pressure,  P2 Kurzzeitiger Druck,  P2	MPa (bar) MPa (bar)	22 (210)	25 (250)								21 (210)
Maximum Peak Pressure,  P3 Spitzendruck,  P3	MPa (bar) MPa (bar)	26 (250)	28 (280)								25 (250)
Maximum Speed,  nmax Drehzahl,  nmax	min-1 min-1	3000	3600				3000
Minimum Speed,  nmin Drehzahl,  nmin	min-1 min-1	500

GP4…22N-4 详情...

GP16…45N-4 详情...