gear pumps of design version MASTER
Products / 齿轮泵 / gear pumps of design version MASTER
Series 'MASTER' gear pumps are produced with nominal pressure 160 bar and 200 bar.
The basis for pump design is a long experience of factory specialists and world companies.
Effective design, modern parts and high precision technological equipment provide steady efficiency during the whole service life.
Series 'MASTER' pumps are fully interchangeable with series 'UNIVERSAL' pumps, when used flexible pipes.
| Group by displacement / Gruppe nach Foerdervolumen | 3 (20...50 ccm) | 3 (32...50 ccm) | |||||||
| Displacement Code / Kode vomFoerdervolumen | 20 | 25 | 32 | 40 | 50 | 32 | 40 | 50 | |
|
Displacement, q Foerdervolumen, q |
см3 ccm |
20 | 25 | 32 | 40 | 50 | 32 | 40 | 50 |
|
Maximum Continuous Pressure, P1 Dauerdruck , P1 |
МПа MPa (bar) |
20 (200) | 16 (160) | ||||||
|
Maximum Intermittent Pressure, P2 Kurzzeitiger Druck, P2 |
МПа MPa (bar) |
25 (250) | 21 (210) | ||||||
|
Maximum Peak Pressure, P3 Spitzendruck, P3 |
МПа MPa (bar) |
28 (280) | 25 (250) | ||||||
|
Maximum Speed, nmax Drehzahl, nmax |
мин-1 min-1 |
3600 | 3000 | ||||||
|
Minimum Speed, nmin Drehzahl, nmin |
мин-1 min-1 |
500 | |||||||
 |
HIII32...50M-3 |
 |
HIII20...50M-4 |